openSUSE Leap 42.2 gets 64-bit Raspberry Image - - The latest release from openSUSE has new images available for the Raspberry Pi and joins SUSE Linux Enterprise Server for Raspberry Pi in becoming the initial...

SUSE Linux Enterprise Server Out for Raspberry Pi 3,... - - The release of SUSE Linux Enterprise 12 Service Pack 2 is not the only thing SUSE Linux fans should get excited about today, as a community member published a very...

Canonical Brings Its Ubuntu OpenStack and Ceph Offerings... - - Canonical informs Softpedia about their latest collaboration with ARM, the industry's leading supplier of microprocessor technology, to bring the company's OpenStack...

embedded

  • Tiny module runs Linux on Altera ARM+FPGA SoC

    Linux on ARMCritical Link announced a tiny, Linux-ready, SODIMM-style module based on the Altera Cyclone V SX-U672 ARM/FPGA SoC. The MityARM-5CSX builds on the Cyclone V’s mix of FPGA logic and dual-core 800MHz ARM Cortex-A9 processing power, adding two GigE channels, a PCI Express bus, and 145 GPIO lines.

  • ARM Releases Free Industry Standard Development Tools For Its Embedded Linux Community

    Linux on ARMWhat: ARM® has extended the scope of the ARM Development Studio 5 (DS-5™) Community Edition (CE) to provide a fully featured, industry standard, and free-to-use software development environment for ARM Embedded Linux applications.

  • Crystalfontz CFA-10036 ARM9 Embedded Module Running Linux 3.7

    Linux on ARMCrystalfontz America, a supplier of LCD and OLED display modules used in embedded systems, has launched a Kickstarter campaignto fund manufacturing and lower the cost of a system-on-module powered by Freescale i.MX28 featuring a small 128×32 OLED display, and lots of GPIOs.

  • Codethink announced its first generation high-performance power-efficient ARM server, the Baserock™ Slab

    Linux on ARMThe Baserock™ Slab is a multi-processor server featuring 8 quad-core ARMv7-A CPUs running at 1.33GHz and an on-board high-speed network switch fabric with 5Gbit/s between the CPUs and 2x10Gbit/s external. Each compute node gets additional performance with its own dedicated low-latency mSATA solid state drive.

  • VIA Announces VIA VAB-800 Pico-ITX Board Based on Freescale i.MX537 Processor

    Linux on ARMVIA Technologies has announced the VIA VAB-800 Pico-ITX board powered by a Freescale i.MX537 (ARM Cortex A8) processor clocked at 800MHz or 1GHz depending on the requirements, with 1GB DDR3-800 SDRAM and support for eMMC Flash with a capacity of up to 64 GB. The VIA VAB-800 is an industrial board that can operate in a wide temperature range and targets high-end industrial and in-vehicle embedded applications.

  • Porting ARMLinux to Embedded Device and Driver Development

    Linux on ARMWith the development of computer, embedded system has become an important part of computer science and researching focus. Porting embedded OS and developing driver are popular now and there has lots of job at the real industry area. Porting ARMLinux and writing drivers based on S3CEB2410 board is studied in this paper. ARM926T is an efficient low-power RISC core.

  • Beaglebone: GPIO Programming on ARM Embedded Linux

    Linux on ARMIn this video I extend my series on introducing the Beaglebone and developing applications using embedded Linux to demonstrate how we can build an application that uses its GPIOs (General Purpose Input/Outputs).

  • Beaglebone: C/C++ Programming Introduction for ARM Embedded Linux Development using Eclipse CDT

    Linux on ARMThis video introduces C and C++ programming on the Beaglebone platform, which is applicable to any embedded Linux development. I quickly introduce how we can program directly on the beaglebone using a terminal window and point out the limitations.

  • MontaVista’s announces Carrier Grade Edition for ARM

    Linux on ARMBarcelona, Spain, February 28, 2012 – MontaVista® Software, LLC, a leader in embedded Linux® commercialization services, today announced the release of MontaVista Carrier Grade Linux for ARM. In four years, the number of network devices will be double the size of the world population, according to Cisco VNI, 2011.

  • Creating and Debugging Linux Applications Using Sourcery CodeBench for ARM GNU/Linux

    Linux on ARMLearn how to use Sourcery CodeBench to develop and debug embedded Linux applications. This video shows how to create an application for a target that is running Linux, download the application to the target, and remotely debug an application that is running on a target using Sourcery CodeBench.

  • µClinux for ARM Cortex-M3

    Linux on ARMEnergy Micro and Pengutronix today announced that they will be demonstrating µClinux for the ARM Cortex-M3. This embedded Linux will be running on the energy friendly EFM32 Gecko range of microcontrollers at this year's Embedded World Show.

  • 15 USD ARM Cortex A8 Linux Computer by Rhombus Tech

    Linux on ARMMany of you already probably know about the Raspberry Pi Foundation 25 USD ARM Linux Computer. Rhombus Tech, another non-profit organization, is planning to design a 15 USD ARM Linux computer (excluding casing, power supply, shipping, VAT and custom duties) that the company claims would be at least 3 times faster that the Raspberry Pi.

  • $89 Motherboard System to Run Linux

    Linux on ARMBeagleBone, a miniature motherboard based on the ARM architecture, that will costs around $89 USD (65 EUR), has just been announced. BeagleBone is designed be installed in the BeagleBoard, a low-cost, fan-less single-board computer based on low-power Texas Instruments processors featuring the ARM Cortex-A series core.

  • Final Ubuntu 11.10 spiffs up Unity, adds ARM server support

    Linux on ARMUbuntu 11.10 ("Oneiric Ocelot") was released, featuring makeovers for its Unity desktop and Ubuntu Software Center, plus a switch to the Thunderbird email client and a new backup tool called Deja Dup. On the server side, Ubuntu 11.10 adds ARM support, as well as a new "Juju" cloud management framework, and the integration of OpenStack within Ubuntu Cloud Infrastructure.

  • GeeXboX 2.0 has landed …

    Linux on ARMAfter countless years of development, the 2.0 release of GeeXboX (codename "Love It or Shove It") finally has landed. The GeeXboX project was created in December 2002, 9 years ago, to become the major HTPC / MediaCenter dedicated Linux distribution.

  • Kontron to launch new ARM-based embedded products

    Linux on ARMKontron announced it will release its first computer on modules (COMs) based on single- and multicore ARM processors later this year. Featuring support for operating systems including Linux and Windows 8, the COMs will be followed up in 2012 by ARM-based single board computers, plus tablet, box, and HMI (human machine interface) PCs, says the company.

  • Installing Linux on an ARM-Based BeagleBoard

    Linux on ARMThis article is the first of a series that describe how to develop and run applications using Oracle's Java SE for Embedded -- a full Java SE platform designed for high-end embedded systems -- on ARM-based hardware, specifically the BeagleBoard. This article details how to get Linux running on ARM-based hardware, specifically the BeagleBoard. The next article describes how to develop Java applications and run them on the Beagleboard.

  • Sandia's mini supercomputer runs Linux on 196 Gumstix ARM modules

    Linux on ARMSandia National Laboratories is demonstrating its latest mini supercomputer at ESC Silicon Valley this week, incorporating 196 TI OMAP3530-based Overo Tide modules running Linux. Being used for botnet research as part of Sandia's MegaTux project, the "StrongBox" product combines 28 Gumstix Stagecoach boards, each with seven Gumstix Overo Tide computer modules.


Facebook Twitter RSS E-Mail

Linux on ARM