other_linux

  • Linux-ready i.MX6 SBC is loaded with wireless options

    Linux on ARMForlinx launched an SBC that runs Linux or Android on a quad-core i.MX6, and offers extras like WiFi, Bluetooth, GPS, 3G, and an image sensor interface.

  • Ventana GW5220 ARM Linux SBC Supports WiFi, Wimax, 3G Cellular Connectivity & PoE

    Linux on ARMGateworks recently launched another Freescale i.MX6 board part of theur Ventana family with Vetana GW5220 single board computer with Freescalei .MX6 dual processor, HDMI out, Ethernet, and a PCIe slot that takes modules adding WiFi 802.11 b/g/n/a, 4G Wimax, and 3G (CDMA/GSM) connectivity, as well as other compatible PCIe modules.

  • Get the Tizen Operating System on your Raspberry PI 2

    Linux on ARMThere has been some great work done with getting Tizen running on different development boards, and today I am pleased to see that its the time for the Raspberry PI 2 Dev Board to get some Tizen love courtesy of the Samsung Open Source group.

  • Evo Lution Linux Arm

    Linux on ARMLution-AIS is a powerful and flexible command-line installer that downloads the latest packages from the Arch repositories during installation to provide the most up-to-date system possible. It can be used to provide just the Arch base alone, or also to provide a large choice of full desktop environments, window managers, display managers, and network managers.

  • CRUX-ARM

    Linux on ARMUpdated! - CRUX-ARM is a port of CRUX distribution to ARM devices and was born in the beginning of 2009. The primary focus of CRUX-ARM is provide a port of CRUX distribution to ARM devices. It follows CRUX guidelines, trying to keep in mind the KISS (Keep It Simple, Stupid) concept and share characteristics. It's targeted to experienced linux (and better CRUX) users.

  • Hybrid Freescale and Xilinx SoCs Embed Microcontrollers, Run Linux

    Linux on ARMEmbedded World, which was held this week in Nuremberg, Germany, lacks the glamor and headlines of next week's Mobile World Congress in Barcelona. Yet, along with showing off the usual circuit boards, the show coincided with the debut of two interesting new system-on-chips that combine Linux-friendly ARM Cortex-A cores with microcontroller units (MCUs).

  • MXM COM runs Linux on new Freescale i.MX 6SoloX SoC

    Linux on ARMF&S Elektronik Systeme debuted a COM based on Freescale’s new MCU-enabled “i.MX 6SoloX” SoC, and offering dual GbE, multimedia, serial, and PCIe interfaces.

  • Snappy Ubuntu Core is an IoT Linux Distribution for ARM and x86

    Linux on ARMCanonical has announced a version of Ubuntu specifically designed for IoT devices running Linux, with a low hardware requirements, and a new package manager called snappy, replacing apt-get for this version of Ubuntu, which provides simpler, faster, and more reliable updates, stronger security, and allows roll-backs in case something goes wrong.

  • 3D printer dev kit runs Linux on new Marvell ARMv7 SoC

    Linux on ARMMarvell announced the first Linux-based hardware/software development kit for 3D printers, built around a new, 533MHz “88PA6120″ ARMv7 SoC.

  • Orange Pi Is The Latest Raspberry Pi Inspired ARM Board

    Linux on ARMThe latest low-cost, Linux-friendly ARM single board computer is the Orange Pi that's trying to ride off the success of the Raspberry Pi.

  • 64-bit ARM architecture project update

    Linux on ARMIn this month’s project update we will take a look at the ongoing FreeBSD 64-bit ARM port. AArch64 is the official name for the 64-bit ARM architecture, but it is also known as ARMv8 and arm64. The 64-bit ARM architecture is expected to find use in traditional server markets, in contrast to the embedded and mobile markets where 32-bit ARM is widely adopted.

  • Dev board runs Yocto Linux on Altera ARM+FPGA SoC

    Linux on ARMNewark Element14′s “Lark Board” SBC runs Yocto Linux on Altera’s ARM/FPGA Cyclone V SX SoC, and offers USB Blaster II, camera, and expansion interfaces.

  • NetBSD - ARM multiprocessor support

    Linux on ARMThose following the source-changes mailing list closely may have noticed several evbarm kernels getting "options MULTIPROCESSOR" in the last few days. This is due to those configurations now running properly in SMP mode, thanks to work mostly done by Matt Thomas and Nick Hudson.

  • Robot OS to support Linux and Android on Snapdragon

    Linux on ARMThe OSRF plans to add ARM support to the Robot Operating System (ROS), starting with the Snapdragon 600 running Linux in Q4, followed by Android in 2015.

  • Cortex-A5 SBC offers mainline Linux support

    Linux on ARMEmtrion’s new SBC uses Atmel’s Cortex-A5-based ATSAMA5D36 SoC and offers HDMI, 2x Ethernet, a battery charger, -40 to 85°C operation, and draws less than 300mA.

  • Easy and Safe Way to Try Linux on Popular Rockchip RK3188 mini PCs

    Linux on ARMUntil recently, installing Linux on Rockchip R3188 based TV boxes or HDMI TV dongles meant you had to flash one or more binaries to your device using various type of tools for Linux or Windows.

  • Amptek iCon is an ARM Cortex M3 Board for IoT Running uCLinux (Crowdfunding)

    Linux on ARMUp until now, the only company I ever heard running Linux on ARM Cortex M3/M4 was EmCraft Systems with their system-on-modules and development kits based on Freescale Kinetis, STMicro STM32 and Actel Smartfusion micro-controllers.

  • Pidora 2014 Is Now the Most Advanced Raspberry Pi Linux Distro

    Linux on ARMPidora 2014, an optimized Fedora Remix for Raspberry Pi, has been released by the CDOT team from Seneca College. Pidora 2014 is based on the latest build of Fedora for the ARMv6 architecture and includes packages from the Fedora 20 package set, although not all the packages have been implemented.

  • piCore 5.2 Is the Smallest Linux Distro for Raspberry Pi

    Linux on ARMTeam Tiny Core has announced that piCore 5.2, the Raspberry Pi port of Tiny Core Linux, has been released and is available for download, featuring a large number of changes and improvements. If you are not familiar with the Tiny Core family of Linux distributions, you need to know that this is a modular-based system with community-built extensions. It usually implements the latest Linux kernel vmlinuz 3.0 and a 5MB core.gz.

  • piCore 5.1 released

    Linux on ARMTeam Tiny Core is pleased to announce the availability of piCore 5.1, the Raspberry Pi port of Tiny Core Linux. It is an independent system architected by Robert Shingledecker and now developed by a small team of developers with strong community support.


Facebook Twitter RSS E-Mail

Linux on ARM